Mô tả sản phẩm

Category
Toys/hobbies/goods
toy
Model/Plastic model
Product condition
New, unused
Burden of shipping charges
Shipping included (paid by seller)
shipping method
Easy Mercari delivery
anonymous delivery
Region of origin
to be decided
Number of days until shipping
Ships in 1-2 days
Mini 4WD carbon brush motor oil set of 2
　　　
[advantage]

※postscript
The container was changed due to a liquid leakage accident.
Since it is also used for medical purposes, it is better than the previous container.
As shown in the photo, it is now possible to attach directly to the community and carbon using the instant adhesive micro nozzle.
If the micro nozzle does not fit properly, lightly burn the micro nozzle with a lighter etc. and insert it again.
It does not come with a micro nozzle.

This oil will warm up the carbon brush motor of the Mini 4WD.
This is a product with a proven track record, with reports of winning results from monitor racers.
You can finish the break-in of the carbon brush motor, which took a long time, in about 5 to 15 minutes at 3V.

how to use:
Insert the advantage through the hole in the end bell and attach it to the community and brush.
While listening to the rotation sound, turn at 3V in the forward direction or in the reverse direction if it is an FM vehicle.
At first, I think it's unstable as the rotation goes up and down.
If the rotation does not seem stable even after running for about 5 minutes, stop the motor, clean it with a parts cleaner, etc., and then apply Advantage to the community and brush.
Furthermore, turn the voltage at 3V and visually check how the brush wears down through the hole in the end bell.
I think the rotation will become stable, but even if it remains unstable, please stop the rotation when the brush is worn down.
There are individual differences in motors in the series of steps up to this point, so we rely on the user's intuition.
After break-in, please wash with parts cleaner etc.

Finish break-in:
After drying, oil is dropped on the shaft and rotated at a low voltage (2 V or less) to prepare the surface of the brush.
You can use it without any problem even if you use it as it is.
There was a report from the monitor racer that there was no problem even if it was used as it was.